Spare parts

Mainboard

8.8.1.1.000036

This is the USB board, which connect computer and print with a USB cable, the printing date transfered from computer to USB board.Its located at the front view, right up machine box.

Printhead board

8.8.2.2.000061

Recommended spare

Printhead board was located at the carriage up plate, it connected USB board with the optical fiber, it transfered the printing signal to the printhead.

Print head adapter board

8.8.6.3.000118

Recommended spare

Printhead board was located at the carriage up plate, it connected USB board with the optical fiber, it transfered the printing signal to the printhead.

Key display board

8.8.9.1.000026

Used to display the status and instructions of the system running

LCD Screen 1602A

4.3.9.9.000492

This board was located at the front view, right side of the machine box.It joined with key panel board, its the screen for key panel board

Raster decoder

8.8.6.2.000007

Recommended spare

This decoder is under the carriage plate, it connect printhead board with a signal cable!It clamped the raster in between of the decoder gap!Its reading the dots on the raster to locate printing position.

Fan Adaptor board

8.8.6.3.000002

Adjust the fan power

Ink supply board

8.8.9.4.000015

Recommended spare

Using for controlling inks supply

Vertical Motor 180W/ISV5718 V36T-01-1000

1.8.1.0.000154

It was installed on the left side of the machine

Motor Driver

1.8.1.0.000163

Used for controlling motor running

Horizontal motor

1.8.1.0.000162

It was installed on the right side of the machine

Lifting sensor

4.3.7.1.000090

Recommended spare

This sensor was for cleaning station up down movement function, it was installed in

Raster

1.1.3.0.000712

Recommended spare

It is on the machine aluminum beam, it was used for printing locating.

Fan Regulator

4.3.7.1.000045

It was located at the front view, right machine box.It controlls fan power!

Media sensor

4.3.9.9.000155

Recommended spare

Its located at the front view, close to the right corner of the pinch roller.It can be detect the media!

Original sensor

4.3.9.9.000156

Recommended spare

There are three sensors of the printer, two at the left、right side of the aluminum beam are the limit sensor, one at the cleaning station for the wiper movement.

Power supply

1.8.6.0.000076

From the machine front view it was installed on the right back side of the machine box., it's the42V power supply for printhead board.

Power supply

1.8.6.0.000019

Power supply for the USB board, the light belt, the fan

Power supply

1.8.6.0.000020

Power supply for Vertical motor

Printhead data cable

4.3.1.2.000121

Recommended spare

This is the printhead cable connect printhead and printhead board, it was used for the signal tranfer from printhead board to the printhead.

Optical fiber cable

4.3.9.9.000196

Recommended spare

It connect USB board with printhead board, it was used fo date transfer.

USB3.0 data cable

1.8.9.0.000064

Recommended spare

This is the USB cable connect computer and printer, it was used for date transfer.

PU open end timing belt

1.1.3.0.000404

This belt tied on the carriage and large gear pulley and left side driven wheel, made them synchronously movement

Annular synchronous belt

1.1.3.0.000852

Horizontal motor belt

Synchronous belt HTD 591- 3M-12

1.1.3.0.000481

Vertical motor belt

Longitudinal driving wheel

1.2.2.1.000018

This driven wheel was installed on the left side of machine aluminum beam, carriage and large gear pulley and left side driven wheel were connected together, made them synchronously movement

Horizontal driving wheel

1.1.2.1.002497

This one was installed on the feeding motor, it turns the feeding synchronous wheel.

Feeding synchronous wheel

1.1.2.1.000099

This connect with feeding motor driving wheel through the feeding synchronous belt.Made the pinch roller synchronously movement.

Ink damper

1.2.3.0.000068

Recommended spare

This is the damper for the printhead, it was installed up on the head, keeps the ink fluent moving.

Capping

1.2.3.0.000067

Recommended spare

Used for printhead moistening and ink absorption

Wiper

1.1.3.0.000877

Recommended spare

Its at the left side of cleaning station, it used for printhead wipe cleaning.

Using for supplying inks

Ink tube

1.4.3.0.000032

Recommended spare

Its the ink supply tube

Filter

1.1.3.0.000895

Recommended spare

Used for filtering ink in ink road

Ink pump

1.8.9.0.000375

Recommended spare

Used for absorbing ink, discharging waste ink