Epson i3200-A1 Print Head
The first-generation i3200 head fitted across the 8-head and 16-head sublimation machines.
The Epson i3200-A1 is the print head fitted to the CS8 PRO and to the A1 build of the 2000 mm sixteen-head machine. We sell it two ways: outright, to a shop that changes its own heads, and fitted as part of a service job for a shop that would rather we did it. Both are normal, and the price is different — tell us which you need when you request your quote.
Connect with us for a quotation tailored to your production.
A1 or A1-2 — the difference in figures
The A1-2 is the second-generation head and is genuinely faster, not a relabel. On the 2000 mm sixteen-head machine, where both are offered from the same frame and we rate them side by side, four-colour single-pass output goes from 600 m²/h on the A1 to 800 m²/h on the A1-2, and every other mode moves with it.
| Mode | i3200-A1 | i3200-A1-2 |
|---|---|---|
| 4-colour, 360*1200dpi (1 pass) | 600 m²/h | 800 m²/h |
| 4-colour, 720*1200dpi (2 pass) | 300 m²/h | 400 m²/h |
| 8-colour, 360*1200dpi (2 pass) | 300 m²/h | 400 m²/h |
| 8-colour, 360*1800dpi (3 pass) | 200 m²/h | 260 m²/h |
These figures are measured on our 2000 mm sixteen-head platform, where both head generations are quoted side by side. Speeds on any other machine depend on its configuration — tell us yours and we'll give you the figure for it.
How we sell it
Standalone
Bought outright, shipped to you, fitted by your own technician.
Fitted
Supplied and installed as part of a service job, with the machine tested before we leave.
Fits these machines
Talk to us about this machine
Connect with us for a quotation tailored to your production.